Material: Carbon Steel, Stainless Steel, Alloy Steel
Technical: Forged and pushing
Connection: Welding
Standard: ANSI, ASME,AP15L,DIN,JIS,BS,GB
Type: 45°and 90°LR/SR Elbow, Reducers, Tee, Bends, Cap, Cross.
Wall Thickness: SCH5-SCH160 XS XXS STD
Surface: Black Paint/Rust-proof Oil/Hot Dipped Galvanized
Angles: 30/45/60/90/180°
Size: 1/2”-80”/DN15-DN2000
Certificate: ISO -9001:2000, API, CCS
Application: Chemical Industry, Petroleum Industry, Construction Industry and Other
Inspection: Factory In-House Check or The Third Party Inspection
Packing: Plywood Pallets/ Wooden Case Or As Per your Specification
Pipe Size |
All Fittings |
90 & 45 Elbows and Tees |
Reducers and Lap Joint Stub ends |
Caps |
|||||||
|
Outside Diameter at Bevel, D (1) |
Inside Diameter at End (1) |
Wall Thickness t |
Center-to-End Dimensions A,B,C,M |
Overall Length, F,H |
|
|||||
|
|
|
|
|
|
Overall Length, E |
|||||
|
|
|
|
|
|
|
|||||
|
IN |
MM |
IN |
MM |
|
IN |
MM |
IN |
MM |
IN |
MM |
½ ~ 2½ |
+0.06 |
+1.6 |
±0.03 |
±0.8 |
Not Less Than 87.5% of Nominal Thickness |
±0.06 |
±2 |
±0.06 |
±2 |
±0.12 |
±3 |
|
-0.03 |
-0.8 |
|
|
|
|
|
|
|
|
|
3 ~ 2½ |
±0.06 |
±1.6 |
±0.06 |
±1.6 |
|
|
|
|
|
|
|
4 |
|
|
|
|
|
|
|
|
|
|
|
5 ~ 8 |
+0.09 |
+2.4 |
|
|
|
|
|
|
|
±0.25 |
±6 |
|
-0.06 |
-1.6 |
|
|
|
|
|
|
|
|
|
10 ~ 18 |
+0.16 |
+4.0 |
±0.12 |
±3.2 |
|
±0.09 |
|
±0.09 |
|
|
|
|
-0.12 |
-3.2 |
|
|
|
|
|
|
|
|
|
20 ~ 24 |
+0.25 -0.19 |
+6.4 -4.8 |
±0.19 |
±4.8 |
|
|
|
|
|
|
|
26 ~ 30 |
|
|
|
|
|
±0.12 |
±3 |
±0.19 |
±5 |
±0.38 |
±10 |
|
|
|
|
|
|
|
|
|
|
|
|
32 ~ 48 |
|
|
|
|
|
±0.19 |
±5 |
|
|
|
Pipe Size |
Lap Joint Stub Ends (2) |
180 Return Bends |
||||||||||
|
Outside Diameter of Lap, G |
Lap Thickness |
Fillet Radius of Lap, R |
Center-to-Center Dimension, O |
Back-to- Face Dimension, K |
Alignment of Ends, U |
||||||
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
||||||
|
IN |
MM |
IN |
MM |
IN |
MM |
IN |
MM |
IN |
MM |
IN |
MM |
½ ~ 2½ |
+0 -0.03 |
+0 -1 |
+0.06 -0 |
+1.6 -0 |
+0 -0.03 |
+0 -1 |
±0.25 |
±6 |
±0.25 |
±6 |
±0.03 |
±1 |
3 ~ 2½ |
|
|
|
|
|
|
|
|
|
|
|
|
4 |
|
|
|
|
+0 -0.06 |
+0 -2 |
|
|
|
|
|
|
5 ~ 8 |
|
|
|
|
|
|
|
|
|
|
|
|
10 ~ 18 |
+0 -0.06 |
+0 -2 |
+0.12 -0 |
+3.2 -0 |
|
|
±0.38 |
±10 |
|
|
±0.06 |
±2 |
20 ~ 24 |
|
|
|
|
|
|
|
|
|
|
|
Pipe Size |
Off Angle, Q |
Off Plane, P |
||
|
IN |
MM |
IN |
MM |
½ ~ 4 |
± 0.03 |
± 1 |
± 0.06 |
± 2 |
5 ~ 8 |
± 0.06 |
± 2 |
± 0.12 |
± 4 |
10 ~ 12 |
± 0.09 |
± 0.19 |
± 5 |
|
14 ~ 16 |
± 3 |
± 0.25 |
± 6 |
|
18 ~ 24 |
± 0.12 |
± 4 |
± 0.38 |
± 10 |
26 ~ 30 |
± 0.19 |
± 5 |
||
32 ~ 42 |
± 0.50 |
± 13 |
||
44 ~ 48 |
± 0.75 |
± 19 |
NOTES:
Out-of-round is the sum of absolute values of plus and minus tolerances.
Outside diameter of barrel see the table on page 15.
(1) According to the purpose, carbon steel can be divided into carbon structural steel, carbon tool steel and free cutting structural steel. Carbon structural steel can be divided into engineering construction steel and machine manufacturing structural steel;
(2) According to the smelting method, it can be divided into open hearth steel and converter steel;
(3) According to deoxidation method, it can be divided into boiling steel (f), killed steel (z), semi killed steel (b) and special killed steel (TZ);
(4) According to the carbon content, carbon steel can be divided into low carbon steel (WC ≤ 0.25%) and medium carbon steel (WCO. 25% - 0.6%)
And high carbon steel (WC > o.6%)
(5) According to the quality of steel, carbon steel can be divided into ordinary carbon steel (higher phosphorus and sulfur), high-quality carbon steel (lower phosphorus and sulfur), high-grade high-quality steel (lower phosphorus and sulfur) and special grade high-quality steel